• ColeSloth@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    13
    ·
    7 months ago
    1. You are sort of correct about this, but it’s irrelevant since everyone moved onto limited slips decades ago.

    As to the rest- you’re wrong. Sorry.

    But the real reason this tech won’t be very important is because it’s a lot more complicated and expensive than a cheap ass cv joint and is minimally more efficient. I can buy both sides of my vehicle for like $80 and don’t have to worry about em again for ages. I think this new hyundai stuff could be reliable, but it’s going to be a lot more expensive.

    Also, they look like they’d be noisy.

    • XeroxCool@lemmy.world
      link
      fedilink
      English
      arrow-up
      15
      arrow-down
      2
      ·
      edit-2
      7 months ago

      you’re wrong. Sorry.

      No u. Bam, same level argument right there. Are you going to explain why or just throw out contrarian comments?

      Cost will not be a limiting factor. Just about every feature on a 2023 car already costs more than a 1993 car’s version. Did adding a wheelspeed sensor, electronic 4-channel hydraulic brake actuator, and dedicated ecm programming cost too much to implement ABS? Did the complication of 40 sensors (100+ now) and a voodoo box of electronics cost too much to go efi instead of carbs? Did the price of disc brakes stop most cars from ditching rear drums? Did the cost of engineering and testing prevent manufacturers from implementing the following nearly-negligible aero improvements to eek out another 0.1% of fuel efficiency;

      1. aero strakes into mirror shells (prius, escape)

      2. relaminating roof spoilers into every hatchback/suv and even into every pickup bed

      3. Vortex generators on the top surface of tail lights (sonata, chr)

      4. Active grille shutters (fusion)

      5. Full underbody trays

      6. Chin spoilers (splitters) on just about every car to keep air out from underneath

      7. Hood beak splitters to keep grille air off the canopy (Volvo, accord)

      8. Short antennas/glass-embedded antennas to reduce antenna drag

      9. Front fender outlet vents to create laminar flow over the wheels (f150 2015+)

      No, it didn’t.

      And I’d be interested to hear why you think helical-cut gears will be “noisy”. I’m guessing you don’t know why reverse whines in certain cars but not the forward gears

      Edit: also, seriously, go do some shopping. LSDs are on the decline. On top of never being common in the first place, manufacturers at removing to brake-based simulated LSD rather than discrete components. There are incredibly few Fwd cars that ever had LSDs and fwd obviously makes up the majority of North American sales. Even Miatas and Mustangs only get LSD with optional packages.

      • nilloc@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        7 months ago

        Yeah the amount of BS or confidently incorrect in tech articles about automotive engineering is crazy.

        And while gear-sets are really efficient, adding 8 to each of the 4 wheels 32 total, in leu of 2-4 at each end of the car, plus 4 CVs (assuming it’s AWD) has to be close in efficiency. And as a DIY+ car restorer in New England. I wanna see how they seal this thing. And with steering wheels it’s either gonna have to swing the motor around or put the CV back in anyway.

        NVH (noise vibration harshness) is also going to be a huge factor. That and cost and weight is why we don’t have gear driven camshafts except on a select few exotic motorcycle engines and F1 engines.

        Helical gears are the cost effective way to reduce gear noise, but they impart axial loads which would be difficult to overcome in this hinged joint. Herringbone fears eliminate the axial load, but are much harder to make, unless you go with powdered metal sintering. Which I barely trust in a cordless drill, let alone a Kia.

        Edit: And no accounting for wheel castor, or camber changes along the suspension travel (way more basic and important for handling than torque vectoring). This video is pure marketing wank.

        • XeroxCool@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          7 months ago

          Funny you mention motorcycles with gear-driven cams as being exotic. Generally correct, but I happen to own one of the cheapest out there: the Honda VFR. I sought out mine for being the last with the gears before going to a normal drive in 02. It’s a glorious sound.

          Anyway, that’s true too, helical gear will need a beefy housing to resist that axial load. That’s more weight. A pair of helicals fastened together could help bring down cost, probably, compared to herringbone, but that’s added complexity. I can’t claim the tech is marketing wank but the video absolutely is

    • Joelk111@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      3
      ·
      edit-2
      7 months ago

      Irrelevant since everyone moved onto limited slips decades ago.

      Lol, what?

      My RSX was made two decades ago in '03, so the newest that would be multiple decades old. It’s also a Type-S, the sporty model. It’s got an open diff.

      My '93 Subaru Loyale, which is 3 decades old, has two open diffs, with a locking center diff. No limited slip.

      My '04 (almost decades old) Crown Vic PI doesn’t have an limited slip. It was an option on Interceptor that the city didn’t opt for.

      My '07 (not decades old) Volvo XC70 has no limited slip diffs. It uses the traction control to try to imitate them, but no actual limited slip differentials.

      My partner’s '07 (still not decades old) Kia Spectra5 has an open diff.

      The only car in my fleet that has a limited slip is my '02 Subaru Legacy Outback, and it was an option that the person who bought it new opted for, and it’s just the rear that’s limited slip, the front is still an open diff. Apparently the limited slip isn’t even that good either, you can still get stuck with two wheels spinning. I haven’t tested that yet, I just got the car.

      If you go out and buy most cars today they’ll come with open differentials. The traction control system will likely try to compensate for this, but they do not have limited slip differentials.

      • BearOfaTime@lemm.ee
        link
        fedilink
        English
        arrow-up
        3
        ·
        7 months ago

        Yea, companies love to tout their “electronic differential” that’s nothing more than an open diff and traction control via the brakes (Toyota Tundra comes to mind, as recent as 2017).

        • Joelk111@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          7 months ago

          Yeah. I guess the person I replied to fell for their marketing? However, even traction control wasn’t terribly common 20 years ago. I’m not sure what they’re on about.

        • Joelk111@lemmy.world
          link
          fedilink
          English
          arrow-up
          7
          arrow-down
          1
          ·
          edit-2
          7 months ago
          1. It’s a hobby. I justify it because they’re worth under 15k combined. Many folk have two cars worth double of all 6 of mine combined (licensing/insurance included)

          The RSX is on the chopping block. I want to get a more dedicated sports car, since I’m privelaged enough to own multiple vehicles.

          The Outback and Volvo are wrecked title purchases from copart that I’ll get salvage titles for, then enjoy for a bit before selling to break even, or even for a possible profit.

          The crown vic is my beater. I drift it. I take it on logging roads. I take it on the Gambler 500. It’s fucking awesome. I’ll always have one, probably.

          The Loyale is something I’ve wanted since highschool. I love the push button 4WD. I love how comically slow it is. I love the interior. I get quite a few compliments on it. It needs some work, but that’s part of the fun. I dunno if I’ll own it forever, but I really like the thing.

          I, as of recently, own my grandpa’s 1984 Oldsmobile Delta 88 Royale. I’ve gotten similar compliments to the Loyale on it. My grandpa is about two weeks away from dying of cancer. I’ll own that car forever.

          My partner owned a Spectra5 when I met her. It’s our economy car, which every household needs. I’d like to upgrade it to a Volt at some point.

          I definitely own too many vehicles, but I love the variety and unique characteristics of each of them.

          Sort of related, but I’m not one of those dickish gearheads, I use and support public transport, and think that the world as a whole would be better off with fewer cars. If one doesn’t want to drive, then they shouldn’t fucking have to.

          • Holyhandgrenade@lemmy.world
            link
            fedilink
            English
            arrow-up
            5
            ·
            7 months ago

            Hey don’t let me take your fun away from you. I just think it’s an unusual amount of cars, but if you enjoy it then that’s great! Sounds pretty cool tbh